Annex D: Techniques for scientific sampling for plastics in the environment
Section titled “Annex D: Techniques for scientific sampling for plastics in the environment”1Table A.31. Summary of methods available for environmental realms and biomes. Classification of realms and biomes is based on the IUCN Global Ecosystem Typology to remain consistency with accounting frameworks.
2Printed columns: Biome; Example functional groups; Example sampling / monitoring methods; Available protocols.
Type of Realm: Core
Section titled “Type of Realm: Core”Marine
Section titled “Marine”1M1 Marine shelf — Example functional groups: Seagrass meadows, kelp forests, photic coral reefs, shellfish beds and reefs, subtidal sand beds, mud plains and rocky reefs, upwelling zones.
2Example sampling / monitoring methods:
- 3Underwater surveys for debris or entanglement
- 4Remote sensing & aerial surveys for debris or entanglement
5Available protocols: The following guidelines are tailored to the transitional zone of shorelines but can be adapted to for use in the marine shelf:
- 6GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 7Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
- 8Guideline for Monitoring Marine Litter on the Beaches in the OSPAR Maritime Area (OSPAR Commission, 2010)
- 9Marine Debris Monitoring and Assessment Project Protocol Documents and Field Datasheets (NOAA)
10M2 Pelagic ocean waters — Example functional groups: Epipelagic, mesopelagic, bathypelagic and abyssopelagic ocean waters, sea ice.
11Note: Sampling in these areas often requires specialist and expensive means. It is recommended these surveys are completed opportunistically, for example during biodiversity surveys, oceanographic research, fisheries assessments or engineering and exploitation missions.
12Example sampling / monitoring methods:
- 13Photographic surveys (from vessels)
- 14Remote sensing & aerial surveys
- 15Water sampling
- 16Net tows
- 17Visual observations (from vessel)
- 18Fisheries observer (opportunistic capture of debris using pelagic fishing gear)
- 19Bongo nets or horizontal nets (microplastics only)
- 20Underway sampling using seawater intakes from vessel (microplastic only)
- 21Submersible pumps lowered from vessel to known depth
- 22Continues plankton recorder (CPR) towed from ships underway
23Available protocols:
- 24GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 25Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
26M3 Deep sea floors — Example functional groups: Continental and island slope, sub-marine canyons, abyssal plains, seamounts, ridges and plateaus.
27Example sampling / monitoring methods:
- 28Underwater sampling while scuba diving (for depths < 30m)
- 29Video (towed, Remotely Operated Vehicles (ROV))
- 30Trawling
- 31Sediment cores
- 32Acoustic methods including sonar, side imaging, sounder (to locate and assess potential accumulation points of debris)
33Available protocols:
- 34GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 35European Marine Observation and Data Network (EMODnet)
- 36Guidance on Monitoring of Marine Litter in European Seas – updated (European Commission, 2023)
- 37Deep-sea Debris Database (JAMSTEC, 2017)
38M4 Anthropogenic or artificial marine — Example functional groups: Submerged artificial structures, marine aquafarms.
39Example sampling / monitoring methods:
- 40Underwater surveys for debris or entanglement
- 41Remote sensing & aerial surveys for debris or entanglement
42Available protocols: As of 2025, no methods exist specifically for artificial marine structures, however where possible, guidelines and methodologies for the marine environment can be adapted to suit, including:
- 43GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 44Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
Freshwater
Section titled “Freshwater”1F1 Rivers and streams — Example functional groups: Permanent upland and lowland streams, freeze-thawed rivers and streams, seasonal upland streams, seasonal lowland rivers.
2Example sampling / monitoring methods: Techniques will change depending on the area of interest (e.g., surface water, water column, river or lake bed / sediment, lake shores, riverbank, etc.). Many of the methods used in the marine environment can be applied to freshwater environments, including:
3Available protocols:
- 4Monitoring Plastics in Rivers and Lakes: Guidelines for the Harmonisation of Methodologies (UNEP, 2021)
- 5Guideline for Monitoring Marine Litter on the Beaches in the OSPAR Maritime Area (OSPAR Commission, 2010) has previously been adapted to monitor plastics on riverbanks and support identification of items collected.
6F2 Lakes — Example functional groups: Large and small permanent freshwater lakes, seasonal, freeze-thaw and ephemeral freshwater lakes, ephemeral salt lakes, geothermal pools and wetlands, subglacial lakes.
7Example sampling / monitoring methods:
- 8Net sampling and tows (from vessels, riverbanks or bridges)
- 9Surface or sediment trawls
- 10Sediment grabs (e.g., Ekman grabs, metal spoon) and cores (e.g., gravity coring)
- 11Water sampling
- 12Surface pumps
- 13Visual observation (from vessels, riverbanks or bridges)
14Available protocols:
- 15River-OSPAR Guidelines are currently in the scoping phase but preliminary guidance is available: Scoping study on methods for riverine litter monitoring (OSPAR, 2024)
16F3 Artificial wetlands — Example functional groups: Large reservoirs, rice paddies, freshwater aquafarms, canals, ditches and drains.
17Example sampling / monitoring methods:
- 18Reservoirs should be sampled according to zoning (riverine, transitional and lacustrine zones) to determine gradients of plastic contamination
Terrestrial (including urban & industrial ecosystems)
Section titled “Terrestrial (including urban & industrial ecosystems)”1T1 Tropical-subtropical forests — Example functional groups: Tropical/subtropical lowland rainforests, tropical heath forests.
2T2 Temperate-boreal forests and woodlands — Example functional groups: Boreal and temperate high montane forests and woodlands, deciduous temperate forests, oceanic cool temperate rainforests.
3T3 Shrublands and shrubby woodlands — Example functional groups: Seasonally dry tropical shrublands, cool temperature heathlands.
4T4 Savannas and grasslands — Example functional groups: Trophic, pyric tussock or hummock savannas, temperate woodlands.
5T5 Deserts and semi-deserts — Example functional groups: Thorny deserts, semi-deserts, hyper-arid deserts.
6T6 Polar-alpine (cryogenic) — Example functional groups: Ice sheets, glaciers and perennial snowfields, polar tundra and deserts, tropical alpine grasslands and herbfields.
7Shared example sampling / monitoring methods for T1–T6:
12Shared available protocols for T1–T6: As of 2025, no methods exist specifically for the terrestrial environment, however where possible, guidelines and methodologies for the marine environment can be adapted to suit, including:
- 13GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 14Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
15T7 Intensive land-use — Example functional groups: Urban and industrial ecosystems, annual croplands, plantations, sown pastures, derived semi-natural pastures and old fields.
16Example sampling / monitoring methods:
- 17Wastewater, raw sewage and sewage sludge are typically sampled for microplastics by:
- 21Open burning and/or dumping are usually sampled using:
- 26Market sampling of fish and shellfish to estimate human exposure to plastic through seafood consumption (microplastics)
27Available protocols:
- 28Wastewater and sampling of wildlife: Monitoring Plastics in Rivers and Lakes: Guidelines for the Harmonisation of Methodologies (UNEP, 2021)
- 29Guideline for National Greenhouse Gas Inventories in Chapter 5: Incineration and Open Burning of Waste (IPCC, 2006). Note: IPCC subsequently published the 2019 Refinement to the 2006 Guidelines, which updates this chapter (Volume 5, Chapter 5) with revised methodology.
30S1 Subterranean lithic — Example functional groups: Aerobic caves, endolithic systems.
31S2 Anthropogenic subterranean voids — Example functional groups: Anthropogenic subterranean voids.
32Example sampling / monitoring methods:
- 33Sediment sampling from cave floors
- 34Cave sediment collection and density separation
- 35Targeted sampling or surveys
36Available protocols: As of 2025, no methods exist specifically for the terrestrial environment, however where possible, guidelines and methodologies for the marine environment can be adapted to suit, including:
- 37GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 38Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
Type of Realm: Transitional
Section titled “Type of Realm: Transitional”MT Marine-Terrestrial
Section titled “MT Marine-Terrestrial”1MT1 Shorelines — Example functional groups: Rocky, muddy or sandy shorelines, boulder and cobble shores.
2Example sampling / monitoring methods:
- 3Surveys using transects or quadrats
- 4Remote sensing & aerial surveys
- 5Sieving for buried macro-litter in top 5-10cm (Ryan et al,. 2018)
- 6Sediment cores
7Available protocols:
- 8GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 9Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
- 10UNEP / IOC Guidelines on Survey and Monitoring of Marine Litter (UNEP / IOC, 2009)
- 11Guideline for Monitoring Marine Litter on the Beaches in the OSPAR Maritime Area (OSPAR Commission, 2010)
- 12Marine Debris Monitoring and Assessment Project Protocol Documents and Field Datasheets (NOAA)
- 13Guidance on Monitoring of Marine Litter in European Seas – updated (European Commission, 2023)
- 14Australian Marine Debris Initiative (AMDI) Monitoring Protocols
- 15European Marine Observation and Data Network (EMODnet)
16MT2 Supralittoral coastal — Example functional groups: Coastal shrublands and grasslands, large seabird and pinniped colonies.
17Example sampling / monitoring methods:
- 18Surveys using transects or quadrats
- 19Remote sensing & aerial surveys
- 20Beach surveys or opportunist sampling for stranded or dead marine mammals on and seabirds to measure entanglement risk
- 21Opportunistic sampling of marine mammals and seabirds to check for plastic ingestion
22Available protocols: The following guidelines are tailored to the transitional zone of shorelines but can be adapted to for use in other transitional zones:
- 23GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 24Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
- 25Guideline for Monitoring Marine Litter on the Beaches in the OSPAR Maritime Area (OSPAR Commission, 2010)
- 26Marine Debris Monitoring and Assessment Project Protocol Documents and Field Datasheets (NOAA)
- 27Guidelines series on assessing plastic ingestion by ACAP-listed species (The Agreement on the Conservation of Albatrosses and Petrels, 2020)
28MT3 Anthropogenic shorelines — Example functional groups: Artificial shorelines.
29Example sampling / monitoring methods:
32Available protocols: The following guidelines are tailored to the transitional zone of shorelines but can be adapted to for use in other transitional zones:
- 33GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 34Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
- 35Guideline for Monitoring Marine Litter on the Beaches in the OSPAR Maritime Area (OSPAR Commission, 2010)
36FM1 Semi-confined transitional waters — Example functional groups: Deepwater coastal inlets, permanently open riverine estuaries and bays, intermittently closed and open lakes and lagoons.
37Example sampling / monitoring methods:
- 38Shoreline surveys using transects or quadrats
- 39Remote sensing & aerial surveys
- 40Sieving for buried macro-litter in top 5-10cm (Ryan et al,.2018)
- 41Sediment cores (typically most useful for micro-plastics)
- 42Surface water sampling
43Available protocols:
- 44Monitoring Plastics in Rivers and Lakes: Guidelines for the Harmonisation of Methodologies (UNEP, 2021)
- 45GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 46Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
- 47Guideline for Monitoring Marine Litter on the Beaches in the OSPAR Maritime Area (OSPAR Commission, 2010)
- 48Australian Marine Debris Initiative (AMDI) Monitoring Protocols
49TF1 Palustrine wetlands — Example functional groups: Tropical flooded forests and peat forests, permanent marshes, subtropical/temperate forested wetlands, seasonal floodplain marshes.
50MFT1 Brackish tidal biome — Example functional groups: Intertidal forests and shrublands (including mangroves), coastal river deltas, coastal saltmarshes and reedbeds.
51Example sampling / monitoring methods:
- 52Surveys using transects or quadrats
- 53Remote sensing & aerial surveys
- 54Sieving for buried macro-litter in top 5-10cm (Ryan et al,.2018)
- 55Vegetation entanglement surveys & observations
- 56Sediment cores (typically most useful for micro-plastics)
57Available protocols: As of 2025, no methods exist specifically for these environments, however where possible, guidelines and methodologies for the marine environment can be adapted to suit, including:
- 58GESAMP Guidelines for the Monitoring and Assessment of Plastic Litter in the Ocean (2019)
- 59Understanding the State of the Ocean: A Global Manual on Measuring SDG 14.1.1, SDG 14.2.1 and SDG 14.5.1 (UNEP, 2021)
- 60Guideline for Monitoring Marine Litter on the Beaches in the OSPAR Maritime Area (OSPAR Commission, 2010)
61SF1 Subterranean-Freshwater — Example functional groups: Underground streams and pools, groundwater ecosystems.
62SF2 Anthropogenic subterranean-Freshwater — Example functional groups: Water pipes and subterranean canals, flooded mines and other voids.
63SM1 Subterranean tidal — Example functional groups: Anchialine caves, anchialine pools, sea caves.
Cite this section
Annex D Annex D: Techniques for scientific sampling for plastics in the environment. Jayasinghe, R., Dickinson, H., Belonje, E., Charlesworth, B., Sambyal, S. S., & Northrop, E. (2026). Handbook on developing National Plastics Data Systems: A practitioner's guide. Centre for Sustainable Development Reform, UNSW. https://doi.org/10.5281/zenodo.22193334