Annex B: Waste Management Terminology Comparison
Section titled “Annex B: Waste Management Terminology Comparison”1Consistently using the same definitions when developing plastics data is critical to success. In September 2024, UNEP’s Global Partnership on Marine Litter Community of Practice circulated a working document summarising plastics definitions and which organisations advocated for each definition.
2Whilst there will likely continue to be variation between organisations on certain definitions (e.g., see variations for “mismanaged waste” below), individual countries should set out what they consider to be encompassed within each definition.
3CSDR have made recommendations for key terms – see the Key Definitions section.
4Table A.30. UNEP Waste terminology assessment
| Term | Description | Advocated By |
|---|---|---|
| Total Uncollected MSW | Calculated by subtracting the total MSW regularly collected from the total MSW generated. | Waste Wise Cities (UN-Habitat) |
| Total MSW Collected | The amount of MSW generated that is moved from the point of generation (specific addresses or designated collection points) to facilities where the waste is recovered or disposed, regardless of collection modality. The remaining share of MSW generated is considered “uncollected”. | Waste Wise Cities (UN-Habitat) |
| Unmanaged Waste | Consists of uncollected waste and waste that leaks out from the solid waste management system, both intentionally and non-intentionally, as well as illegally dumped waste in the environment. | Waste Flow Diagram (GIZ) |
| Mismanaged Waste (Definition 1) | Defined as the sum of uncollected and improperly disposed waste. It is plastic that is prone to be released to the environment. | Hotspotting Methodology (UNEP/IUCN) and PLASTEAX (EA) |
| Mismanaged Waste (Definition 2) | Waste that is not captured by any state-of-the-art waste collection or treatment facilities. It includes waste that is burned in open pits, dumped into seas or open waters, or disposed of in unsanitary landfills and dumpsites. | Organisation for Economic Co-operation and Development (OECD) |
| Littering | The incorrect disposal of small, one-off items, such as throwing a cigarette, dropping a crisp packet, or a drink cup. Most of the time these items end up on the road or sideways. They may or may not be collected by municipal street cleaning. | Hotspotting Methodology (UNEP/IUCN) and PLASTEAX (EA) |
| Litter | Waste that results from littering by individuals in the environment and from fly-tipping. Littered waste is distinct from mismanaged waste, because littering behavior is not necessarily correlated to the provision of basic waste collection and disposal infrastructure. Littered waste can either be collected for further disposal or remain uncollected and leak into the environment. | Organisation for Economic Co-operation and Development (OECD) |
| Fly-tipping | The deliberate disposal of large quantities of litter in the environment without any specific location. This could be anything from a single bag of rubbish to a large sofa to a broken refrigerator (e.g., accumulating on the roadside or remote places). | Hotspotting Methodology (UNEP/IUCN) and PLASTEAX (EA) |
| Leakage (Definition 1) | A quantity of plastic entering the oceans as well as other environmental compartments (e.g. rivers, soil, air). | Hotspotting Methodology (UNEP/IUCN) |
| Leakage (Definition 2) | Plastic that is released to rivers, lakes and oceans. | PLASTEAX (EA) |
| Plastic Leakage (Definition 3) | Refers to plastics that enter terrestrial and aquatic environments. | Organisation for Economic Co-operation and Development (OECD) |
| Loss | The quantity of plastics that leaves a properly managed product or waste management system, as the fraction of materials that is detached from the plastic product during manufacturing, use or transport for microplastics or as mismanaged waste for macroplastics. Losses are specific to various sources and activities (e.g., the processes of losing all types of plastics into the environment through abrasion, weathering or unintentional spills during production, transport, use, maintenance or recycling of products containing plastics, littered plastic packaging). | Hotspotting Methodology (UNEP/IUCN) |
| Releases | The fractions of the loss that are ultimately released into different environmental compartments including (i) waterways and oceans; (ii) shallow and deep soils; (iii) terrestrial environment other than soils, such as dumpsites, buildings or trees, or littered plastic packaging; and (iv) air, such as plastic micro-fibers emitted when synthetic textiles are worn. | Hotspotting Methodology (UNEP/IUCN) |
| Landfill | The deposit of waste into or onto land. It includes specially engineered landfill sites and temporary storage of over one year on permanent sites. The definition covers both landfills at internal sites, i.e. where a generator of waste is carrying out its own waste disposal at the place of generation, and at external sites. | Waste Wise Cities Tool (UN-Habitat) |
| Dumping | The deliberate disposal of large quantities of litter in a particular area, that is not controlled. Dumping can be the result of the formal or informal collection sector. This could be anything from a single bag of rubbish to a large sofa to a broken refrigerator. | Hotspotting Methodology (UNEP/IUCN) |
| Sanitary Landfill (Definition 1) | A method of disposing waste on land without disturbing the environment and public health. | PLASTEAX (EA) |
| Sanitary Landfill (Definition 2) | The final disposal of waste in or on land in a controlled way and according to state-of-the-art sanitary, environmental protection and other safety requirements. | Not specified in the image |
| Solid Waste Disposal | The discharge, deposit, injection, dumping, spilling, leaking or placing of solid waste on or in the land or water. This definition may vary under diverse local, state, provincial and national laws. | Organisation for Economic Co-operation and Development (OECD) |
| Disposal | Encompasses multiple operations categorised with codes D1–D15, including: deposit into land (D1), land treatment (D2), deep injection (D3), surface impoundment (D4), specially engineered landfill (D5), release into water bodies (D6), release into seas/oceans (D7), biological treatment (D8), physicochemical treatment (D9), incineration on land (D10), incineration at sea (D11), permanent storage (D12), blending or mixing (D13), repackaging (D14), and storage pending operations (D15). | Basel Convention |
| Disposal Facilities | Sites which are regularly used by public authorities and private collectors, regardless of their level of control and legality, for the disposal of waste. Such sites may or may not have official recognition, a permit or a license. Disposal sites may be managed in either a controlled or uncontrolled manner. The definition excludes unrecognised places where waste is deposited occasionally in small amounts which public authorities may clean up from time to time. | Waste Wise Cities Tool (UN-Habitat) |
Cite this section
Annex B Annex B: Waste Management Terminology Comparison. Jayasinghe, R., Dickinson, H., Belonje, E., Charlesworth, B., Sambyal, S. S., & Northrop, E. (2026). Handbook on developing National Plastics Data Systems: A practitioner's guide. Centre for Sustainable Development Reform, UNSW. https://doi.org/10.5281/zenodo.22193334